Dilshan R Jayakody’s Web Log

In this project we introduce portable microprocessor controlled CW radio beacon. This CW beacon module is capable to transmit maximum of 64 Morse codes repeatedly in 4.433MHz with 9V DC power source. This system consists of CW transmitter, ATtiny13 microcontroller unit and low current voltage regulator. Atmel ATtiny13 microcontroller is used to drive the transmitter and thanks to its internal 64 byte E²PROM, we may be able to change beacon data without altering the system firmware. While at the testing stages we receive this beacon on 10km radius (using Sony ICF-SW7600GR receiver) by using standard telescopic antenna. To get the maximum range it is recommended to use 3m – 4m antenna wire with this transmitter system. At the prototyping /testing stages we try this transmitter successfully with 3.58MHz, 4.43MHz and 6.00MHz crystals. This system is design to work with standard 9V battery (6F22/6LR61). At the prototyping stages we test this system using 12V and 10V DC power sou...

In this project we develop easy to build Microchip PIC development board for widerange of PIC Microcontrollers (which include 40pin Microchip PIC16 and PIC18 devices). This development board contain only the switching regulator (to generate +5V DC from the input power source) and RS232 serial port interface. The switching regulator of this development board may support input voltage of +8V to +25V DC. RS232 Serial interface of this development board is based on Maxim's MAX232 driver/receiver IC. This given design have 6 two-way jumpers to select crytal osciliator, MCLR and RS232 Tx/Rx terminals. While at the protyping stages we test this board successfully with PIC16F887, PIC16F877/A, PIC18F452, PIC18F4550 and PIC18F4620 MCUs. Diamensions of this PIC Development Board is 110×85mm. Schematic, PCB design and some of the related documents of this project are available to download at google drive .

In this project we develop USB port base controller for XBMC application. Main functionality of this controller unit is to provide remote control interface, LCD base - player information panel and rotary encoder base controller for XBMC. With this given hardware design and software programs, user may be able to control XBMC without using standard input devices such as keyboard and mouse. This device is design to work with XBMC Version 10.1 ( codename Dharma ) or newer versions. Older version of XBMC may not work this system because of the differences in its Web Control Interface. PIC18F4550 is a main hardware controller of this system. This microcontroller is used for USB interfacing, as LCD driver, IR base remote control data decoder and as a driver of the other input devices (such as rotary encoder and push switches). Controller’s USB interface is design to work as USB HID class device. This system is design to work with Microsoft Windows Operating Systems and we test this...

In this post we introduce easy to build, full featured PIC16F877A/PIC16F887 microcontroller development board. This development board contains following core features: RS232 interface PS/2 host interface Battery backup - Real Time Clock with I2C interface Highly precision 1-wire thermometer interface 4 Digit Seven Segment Display module HD44780 compliant LCD module 4×4 Keyboard 4 button onboard joystick 8×2 LED driver 8bit peripheral driver interface 8bit Digital to Analog converter module 36kHz Photo module for Infrared base inputs Wide supply voltage range from 12V – 40V To reduce the form-factor we design this system in a double sided PCB. When constructing this project make sure to use exact component values for PSU module (especially for L1, R1 and R2). When constructing the circuit do not connect R4 and R5 wires to the PCB. Both these wire links are providing to isolate the PSU from main board. After constructing the circuit power on the PSU and check the v...

In this project we introduce easy to build, miniature servo controller. This miniature servo controller system is ideal for most of the robotic and mechanical projects. Some of the most notable key features of this project are: Tiny PCB design (35mm × 33mm aprox.) using standard through-hole components. Support for both analog and digital control interfaces. Compatible with most of the servo units. Low cost due to small amount of components. The main controller of this project is PIC12F675 – 8bit CMOS microcontroller. In this given design we configure PIC12F675 microcontroller to operate using its 4MHz internal oscillator. This designed servo controller may successfully work with any generic servos which include MYSTERY, Futaba, HiTec, JR Radio, etc. At the prototyping stages we test this controller with several MYSTERY 3.7g and 9g servos. This servo controller is design to work in 2 operating modes. In first mode this system may work with analog potentio...

Open Hardware community selected “Golden Orb” by Macklin Chaffee as the OSHW Logo v1.0. Congratulations Golden Orb! You can also get open hardware definition from this link: http://freedomdefined.org/OSHW . Visit Open Hardware Summit – home page to get more information and updates about “Open Hardware”.

Electric Fences are designed to create an electrical circuit when touched by person (or animal). The circuits proposed in this article release 10kV electrical pulses to the fence-line and monitor the line status. This entire system is design to drive using 25V (5A) single-rail DC power source (using 5A power supply unit or pair of 12.6V Lead-Acid batteries). Main controller of this system is Microchip PIC12F675 – 8bit microcontroller. All the line monitoring, pulse generation and alarm system controlling is performed by this microcontroller. Some of the most notable features of this system are built-in audible alarm system, contactless fence line monitoring system, Support for wide range of step-up transformers (up to maximum of 10kV) and compact 10cm × 10cm PCB design. This system use standard electronic components (through-hole components) and SMD components in this provided PCB layout. All the project documents, schematics, PCB designs and firmware source codes are available...