Dilshan R Jayakody’s Web Log

The main objective of this project is to create an experimental prototype of a digital potentiometer using Microchip's MCP4141 IC. MCP4141 is available with end-to-end resistances of 5KΩ, 10KΩ, 50kΩ, and 100KΩ. This potentiometer-module can drive MCP4141 with any of the above mention resistances. 3D view of MCP4141 based digital potentiometer PCB To drive the MCP4141, this module use ATtiny13 MCU. This MCU control MCP4141's resistance, based on the rotary-encoder events. ATtiny13 is an 8-pin, low power 8-bit MCU with an internal oscillator. The key reason to pick this MCU is its availability and lower price. Due to a lack of hardware-based SPI, this system use bit-banging SPI implementation to drive the MCP4141 IC. To reduce the board size, this module employs only 3 components. Which including ATtiny13, MCP4141, and rotary-encoder. The dimension of the PCB design given for this module is 26.16mm × 29.72mm. Breadboard wiring diagram This is an open-source har

AVR-HV2 is Arduino based high voltage parallel programmer for AVR microcontrollers. This programmer can read, write, and erase both flash memory and EEPROM. Also, this can use to set fuse bits of AVR MCUs. Compare with the previous version of AVR HVPP , this design is based on commonly available components with a simple schematic. In this release driver software is also rewritten to provide cross-platform support. AVR-HV2 shield with Arduino Mega 2560 board. AVR-HV2 programmer is designed as an Arduino Mega shield. Dimensions of the AVR-HV2 are similar to the Arduino Mega board. It can be powered using a power source connected to the Arduino Mega board. The suggested power source for this programmer is a 12V 1A DC power adapter. The control software of this programmer is design to work on both Windows and Linux operating systems. It supports the import and export of memory data in the Intel hex file format. The communication link between the programmer and the control s