Dilshan R Jayakody’s Web Log

This project introduces an open-source, ATmega328 based, configurable NTP clock with a 2.3-inch, 7-segment display driver. This clock automatically obtains time from the configured NTP server and updates the date and time of the built-in RTC (real-time clock). If the connection to the NTP server is lost, the clock continues to run using its built-in RTC. Finished NTP clock driver PCB. All the parameters of this clock can configure using its USB base serial terminal. The firmware of this clock supports both static and DHCP addressing modes. Apart from that, parameters such as NTP server address, time-offset, and clock display formats can change through the menu-driven configuration terminal. This clock is designed to drive large common-anode, 7-segment displays. The prototype version is assembled using four individual segments of 7.2V, 2.3-inch, red color displays ( FJS23101BH ). To archive, the necessary high output voltage and the current, the 7-segment display output stage of this

This is an RDA5807M based FM stereo radio module. This module is designed to replace old, low-voltage, analog FM stereo radio receiver modules. Like many digital receivers, this module also got auto scanning, station memory, and digital volume control. This module can driver using 5V to 9V DC power source. FM stereo receiver module with seven-segment display unit. The frequency range of the receiver is 88MHz to 108MHz. The auto scanner of this module can tune the receiver with 25kHz increments in up and down directions. The memory manager available with the current firmware can hold up to 10 stations in MCU EEPROM. Bottom side of the receiver module The dimensions of this module are 72.85mm × 32.0mm. With the seven-segment display, the depth of the assembled module is 37.5mm. AF output power of this module is not sufficient to handle the pair of speakers. To drive speakers, this module needs to pair with a stereo AF power amplifier kit/module .  This is an open-source hardware project