Dilshan R Jayakody’s Web Log

In this design we present an electronic number display panel using low cost and low power electronic components. This proposed design is mainly based on CD4510 - CMOS up/down counter and SN74LS47 - BCD-to-Seven-Segment Decoder/Driver. With the existing configuration, this counter may be able to count (up/down) from 00 to 99 and it can easily extend to more digits by setting up additional CD4510 and SN74LS47 chip pairs. Current system is also equipped with the beeper (which based around NE555 timer IC) to indicate the increment or decrement of the count. This system is design to work with DC 9V – 12V (500mA) power supply and at the time of testing we use 10V (2.5A) DC power source to check this system. This proposed system contain 7805 regulator and it is necessary to apply suitable heat-sink to this regulator. In this project, we design PCB using double sided PCB and make dimensions and shapes according to the existing enclosure of old electronic number panel system. It is not ...

In this project we developed 4 inputs (Audio and Video), remote control operated video switch for general home use. This design is mainly based on Microchip PIC16F630 8bit MCU, 4052 differential 4 channel analog multiplexer, TSOP1838 infrared receiver module and 7447 BCD to seven segment decoder. With a given schematic and PCB design users can switch 4 different audio and video sources using compatible remote controller. Current version of this project is work only with most of Sony remote controllers (which based on Sony SIRC protocol) and it can be easily extend to Philips RC-5 protocol with some minor modifications of PIC16F630 software system. In this design we incorporate small single transistor video amplifier to its output stages to amplify the (chroma) part of video signal. Audio output stage of this system may not need any AF amplifier. (In the designing stages we notice some clipping of input signal in 4052 analog multiplexer, but it is not much noticeable in practical e...