Skip to main content

How to resolve Windows 10 IoT core provisioning file flash failure

Recently I checked Windows 10 IoT core on Raspberry Pi 3 B+ board. While flashing this operating system using Windows 10 IoT dashboard I got "Failed to write provisioning file to the microsd card" error. I tried several options in dashboard UI but I got this error continuously.

After some google search, I found a forum in Microsoft MSDN saying that this issue happens due to poor or slow speed SD cards. The SD card which I used previously is Kingston 16GB class 4 SDHC memory card. Later by following the site, I flash this image into new class 10 SD cards and SDXC cards but repeatedly I got this same errors.

After a couple of hours of digging I fix this issue by following the steps below:
  1. Open Windows 10 IoT core dashboard and try to install the OS image. 
  2. If you got "Failed to write provisioning file to the microsd card" error, close the Windows 10 IoT core dashboard.
  3. Open C:\Users\USER-NAME\AppData\Local\Temp\RPi2\msi\msicontent\Microsoft IoT\FFU\RaspberryPi2\ directory and make sure that the appropriate FFU file is located in that location. In my case, FFU file is "Flash.ffu". If you can't locate the FFU files try to search the C:\Users\USER-NAME\AppData\Local\Temp\RPi2\msi\msicontent\Microsoft IoT\FFU directories.
  4. Open the command prompt with administrative privileges.
  5. Type "diskpart" and in the diskpart prompt type "list disk".
  6. Identify the SD card and its disk number. In my system SD card is mapped to disk #1.
  7. Close diskpart prompt by issuing "exit" command.
  8. Now type this following command: "C:\WINDOWS\system32\dism.exe" /Apply-Image /ApplyDrive:\\.\PHYSICALDRIVE1 /SkipPlatformCheck /ImageFile:"C:\Users\USER-NAME\AppData\Local\Temp\RPi2\msi\msicontent\Microsoft IoT\FFU\RaspberryPi2\Flash.ffu". In this command be sure to replace PHYSICALDRIVE1 with the value you found in step 6. For example, if the disk #2 is mapped as SD card then replace PHYSICALDRIVE1 to PHYSICALDRIVE2.
Once I flash my SD card(s) with above steps Windows 10 IoT core start successfully in Raspberry Pi 3 boards. Also I checked this with class 4, class 6 SD cards and operating system flashed successfully on all devices.
Labels:

Comments

Unknown said…
I get the following message:
-----------------------------------


Applying image
[==========================100.0%==========================]

Error: 2

The system cannot find the file specified.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log


---------------
Any Fix?
February 10, 2019 at 6:23 AM
Post a Comment

Popular posts from this blog

Building the TD4 4-Bit CPU

The TD4 is a famous 4-bit CPU featured in the book How to Build a CPU by Kaoru Tonami . The book focuses on constructing a functional processor entirely from basic 74-series TTL logic ICs. While the book is unfortunately only available in Japanese, a friend from Japan sent me a copy along with a TD4 PCB. I believe the PCB is based on the open-source design files available on BG5DIW's GitHub repository . "How to Build CPU" book and the PCB. Recently, I finally found the time to build and experiment with it. The project took a few months, as I had to translate the book myself to grasp the core concepts. The overall design is simple and elegant, offering a set of 12 instructions and a 16-byte ROM (implemented via DIP switches) for programming. The board operates on 5V and can be powered via USB. Most components were sourced from local shops, though I had to order a few 74HC-series ICs online. Later, I tested the circuit by replacing some 74HC components with 74LS series...
Post a Comment
Read more

CD2003 - yet another simple FM radio receiver

In the last few days, we are looking for some simple FM radio receiver to integrate into one of our ongoing projects. For that, we try several FM radio receiver ICs including TDA7000, CD2003/TA2003/TA8164, CXA1019, and KA22429. Out of all those chips we select CD2003 (or TA2003/TA8164) based receiver for our project because of its simplicity and outstanding performance. Except to CD2003, Sony CXA1019 also perform well but we drop it because of its higher component count. We design our receiver based on Toshiba TA2003 datasheet and later we try TA8164 and CD2003 with the same circuit. Either CD2003 or TA8164 can directly replace TA2003 IC, and as per our observations, TA8164 gives excellent results out of those 3 chips. A prototype version of CD2003 FM radio receiver The PCB design and schematic which we used in our prototype project are available to download at google drive (including pin-outs of crystal filters and inductors ). Except for CD2003 IC, this receiver consist...
3 comments
Read more

Arduino superheterodyne receiver

In this project, we extend the shortwave superheterodyne receiver we developed a few years ago . Like the previous design, this receiver operates on the traditional superheterodyne principle.  In this upgrade, we enhanced the local oscillator with Si5351 clock generator module and Arduino control circuit. Compared to the old design, this new receiver uses an improved version of an intermediate frequency amplifier with 3 I.F transformers. In this new design, we divide this receiver into several blocks, which include, mixer with a detector, a local oscillator, and an I.F amplifier. The I.F amplifier builds into one PCB. The filter stage, mixer, and detector stages place in another PCB. Prototype version of 455kHz I.F amplifier. In this prototype build, the Si5351 clock generator drives using an Arduino Uno board. With the given sketch, the user can tune and switch the shortwave meter bands using a rotary encoder. The supplied sketch support clock generation from 5205kHz (tuner f...
Post a Comment
Read more