UPS system is a common peripheral in computer field. Now most of these UPSs are equipped with USB driven system shutdown software. But some of the cheap UPS system may not have software controlled PC shutdown systems and some of them had some limitations too (for example operating system compatibility issues, supporting for multiple nodes, etc.). In this post we design power failure monitor with centralize power switch for array of PCs. Using this system administrators can turn on multiple PCs with single button press and all of these PCs get power down automatically at power failure. To reduce cross platform issues we design this interface to work with main-board power switch and because of this administrators may not need any special software for this system. Most important point of this system is its independence with UPS hardware. Prototype of centralize power switch project Main controller of this system is PIC10F200 - 8bit microcontroller. Thanks to its SOT-23 package w...
This blog contains electronic, amateur radio, and embedded system projects, which I did during my free time. Unless otherwise noted, all the articles and projects described on this blog are based on my original designs.