Dilshan R Jayakody’s Web Log

Have you ever faced the frustration of dealing with an overflowing tank or a pump running dry? These unexpected events can result in costly damage and inconvenience. A reliable floater switch alarm system can provide early warnings, allowing you to take prompt action and prevent further issues. This project guides you through building a do-it-yourself floater switch alarm system using a PIC12F508 microcontroller. The circuit for this project is relatively simple and requires very few components. The system is designed to operate with a 12V DC power supply and utilizes a 230V AC buzzer unit for audible alerts. Prototype version of the alarm controller. The circuit includes a mute function that allows you to temporarily silence the alarm for a specified duration. Additionally, a built-in timeout mechanism ensures continuous alarm activation if the floater switch remains closed for an extended period, indicating a potential emergency. This project is suitable for various applications, in...

This 12V uninterruptible power supply initially designs to drive my fiber optic modem/router. The key reason to build this power supply is to get continuous internet and phone connection during power failures. Core components of this power supply are a constant voltage charger, 12V DC power supply, AC line monitoring unit, and 12V high capacity sealed lead-acid battery. The entire system designs using locally available components. Prototype version of 12V UPS system The charging circuit of this system builds around using the popular LM350 voltage regulator. This regulator calibrates to provide both 14.4V fast charging and 13.6V trickle charging. Based on the condition of the battery, the MCU will determine the appropriate charging mode. At the online state, the LM2576-12 switching regulator provides 12V output to the driving system. (in my arrangement, a fiber optic router). Block diagram of the 12V UPS system The PIC16F688 MCU monitors the AC line and battery to controls the output...

μSim is a lightweight PIC™ CPU and ALU simulator. This simulator supports the PICmicro mid-range instruction set and designed to work on both PC and Arduino platforms. Compare with most of the other emulators, μSim does not provide all MCU features and peripherals. This simulator design as a minimalistic system, and based on the requirements, it can extend with additional peripherals and features. To accomplish this μSim is written with minimum system dependencies and with less complexity. To avoid resource overflows/overruns the source code is carefully organized with a few functions and data types. μSim setup for Arduino and PIC16F84 MCU. Apart from the instruction decoder, this system simulates 1024 words of flash memory, 68 bytes of SRAM, two 8 bit GPIO ports, and register map similar to PIC16F84 MCU. Some of the common MCU peripherals and features such as interrupts, timers, and UART systems are not integrated into this simulator. The main objective of this project is to prov...