This project is about a wireless musical call bell, which I designed to meet some of my friend's requirements. This circuit design uses only the 4000 series CMOS logical ICs, NE555 , UM66 , and TDA7233 audio amplifier IC. For the remote control, we use a 433MHz 4-channel remote control module . This circuit is designed to work continuously with a low-power external 5V power supply. Prototype version of wireless call bell. The PCB in this call bell is designed as a single-sided PCB. The dimension of the PCB is 82mm × 50mm. All the components in this circuit are commonly available through-hole-type components. The whole assembly process of this musical call bell is shown in the video attached to this document. The RF remote control module we use in this project consists of a remote control decoder and encoding IC. In our version, the transmitter (key fob) has a PT2262 encoder, and the receiver has a PT2272 decoder IC. In the prototype build, the receiver and transmitter are confi...
This blog contains electronic, amateur radio, and embedded system projects, which I did during my free time. Unless otherwise noted, all the articles and projects described on this blog are based on my original designs.