Dilshan R Jayakody’s Web Log

A few years back I purchased Honeywell CL15AE evaporative air cooler and it is15L indoor air cooler manufactured by JMATEK (for Honeywell). Sine last week this cooler became dead, and the only thing which I can see live is its red color power indicator. After disassembling the unit I see that most of the components of the controller PCB are rusted and damaged.  As I observed the main reason for corrosion is the absence of protective varnish on the top side of the PCB. The original control board of CL15AE cooler. At first, I restore all the damaged parts in the PCB with new parts, which including SS8050 , SS8550 , transistors and a few of electrolytic capacitors. After replacing those components, the unit starts to beep during power up but failed to power on. Damaged SS8050 and SS8550 transistors. After some tests, I figured out the problem is in SONiX SN8P2602 8-bit microcontroller.  Due to unavailability of microcontroller and it's firmware I decided to pr...

This is a simple sensor kit to drive 8 active or passive sensors and log its data into a remote Android application. This system also has an option to activate an external device(s) based on the specified threshold of sensor data. This sensor controller is mainly built around the Raspberry Pi Model 3 B+ and PIC16F877A MCU. PIC16F877A MCU is used to interface/select sensors and it's built-in 10bit multi-channel ADC is used to capture the analog signals from sensors. During the prototype stage following sensors are tested with this system: LM35 precision temperature sensor MQ7 Carbon Monoxide gas sensor Electret Microphone NSL-19M51 LDR HC-SR501 PIR sensor A3144 Hall effect sensor Apart from the above list this system can use to drive and capture most of the other analog/digital sensor signals such as current sensors, pressure sensors, chemical sensors, humidity sensors, etc. In this system, Android monitoring application is designed to connect with the sen...

HAKKO 907 is popular and commonly available soldering iron in the electronics field. To drive those soldering irons user needs to have HAKKO or any other compatible soldering station. The biggest problems with those soldering stations are there higher price tags and limited availability in the local market. Because of those problems, we decided to create our own soldering station, and for that, we choose " Chinese " version of HAKKO 907 soldering handle. Now Chinese versions of 907 compatible irons are available on eBay for less than 5USD. As per our observations, those Chinese versions of soldering irons look and perform almost similar to genuine HAKKO 907 iron(s). To keep it simple we choose LM358 dual operational amplifier IC to monitor the 907's thermocouple and drive the TRIAC. The entire control circuit of this soldering station is powered by single rail 5V DC power supply. To drive both handle and station we use 12V-0-12V 8A step-down transformer. Interna...