Dilshan R Jayakody’s Web Log

This is contactless DTMF ( Dual Tone - Multi Frequency ) switch to control 16 channel relay boards. This module can turn ON/OFF relays based on DTMF singles which captured from its microphones. This project is building using 4 commonly available ICs which including TL084, TL081, CM8870, and 74LS154. TL084 is used as microphone preamplifier and LPF. TL081 act as combiner and CM8870 is used to decode the DTMF inputs. 74LS154, the demultiplexer is used as line selector. In this circuit TL084 and TL081 and replace with any compatible operational amplifier IC. During our prototyping, we replace TL084 with LM324, TL074, and TL081 with TL071 and got identical results. For the microphones, it is highly recommended to use omnidirectional condenser microphones. In our tests, we get good results when both the microphones are in the 90⁰ plane. This circuit is design to work with single rail 5V DC power source and its output terminal ( SV1 ) is compatible with most of the 16 channel relay bo...

This is PIC16F73 base digital data capture unit with optional EMF reader. This data capture utility is design to work with most of the analog sensor inputs and by default, it is equipped with the EMF reader module. This unit use PIC16F73's internal 8bit ADC to capture the analog signals. EMF reader unit in this schematic is useful to detect variations of EM field in the environment and it is mainly built around uA741 operational amplifier and 12mH detector coil . Normally EMF meters are used to trace electric wires, find hidden transmitters, and diagnose electric wiring problems ( and to find ghosts too ☻ ). This digital data capture unit can operate in 2 modes. In the first mode, it directly converts an analog signal into digital data and transferred to the host via a serial interface. In second mode it displays captured signal in 5 LED bar graph either slow or high-speed capture modes. This unit is designed to work with 5V 500mA power source and to get optional EMF reading...

In this post we introduce easy to build, full featured PIC16F877A/PIC16F887 microcontroller development board. This development board contains following core features: RS232 interface PS/2 host interface Battery backup - Real Time Clock with I2C interface Highly precision 1-wire thermometer interface 4 Digit Seven Segment Display module HD44780 compliant LCD module 4×4 Keyboard 4 button onboard joystick 8×2 LED driver 8bit peripheral driver interface 8bit Digital to Analog converter module 36kHz Photo module for Infrared base inputs Wide supply voltage range from 12V – 40V To reduce the form-factor we design this system in a double sided PCB. When constructing this project make sure to use exact component values for PSU module (especially for L1, R1 and R2). When constructing the circuit do not connect R4 and R5 wires to the PCB. Both these wire links are providing to isolate the PSU from main board. After constructing the circuit power on the PSU and check the v...