Dilshan R Jayakody’s Web Log

Ecowitt2APRS is a new open-source Linux service that I have been working on for the past few weeks. This project is designed to seamlessly integrate weather data from Ecowitt compatible professional weather stations into the global Automatic Packet Reporting System Internet Service (APRS-IS) network, transmitting this information in the standardized format of APRS weather packets. APRS, an amateur radio-based system, facilitates real-time tactical digital communications, covering applications such as GPS position reporting and the dissemination of meteorological data. Ecowitt2APRS addresses a specific need within this ecosystem: providing a lightweight and efficient method for weather stations to contribute to this data stream. Live data view from my Ecowitt weather station on aprs.to. The Ecowitt2APRS service is developed as a minimalist daemon for Linux environments. It ingests live weather data from Ecowitt compatible stations, converts it into the required APRS weather pac...

In this project, we developed a 5.1-channel analog audio processor using PT2322 IC. PT2322 is an inexpensive analog audio processor introduced by Princeton Technology Corporation . It contains 6-channel individual channel attenuators, a 3-way tone control system for front-end speakers, and a 3D audio simulation system.  Assembled 5.1-channel audio processing board. In this design, we combine PT2322 with Arduino Nano and interface it with PC/embedded computing boards through a USB port. Native GTK UI application provides to control all functions of the PT2322 IC. The Arduino Nano can directly plugin to the PT2322 module. There are three push buttons on the panel itself to control the volume and mute the audio. To reduce the cost and minimize the PCB size, we use both SMD and through-hole-type components in this PCB. The dimension of the PCB is 59mm × 60mm. The PCB of this module can directly order from the PCBWay project page . Using the PCBWay service, you can order high-...

Simple NTP clock is a maintenance-free clock application developed to work on single-board computers like Raspberry Pi , Orange Pi , etc. This clock application uses the Simple Network Time Protocol (SNTP) to get the time and display it on seven segment display which I designed . This application is designed to work on most of the Linux based systems and had minimum dependencies with system libraries and peripherals. I developed this application to work with Allwinner H2 Plus based Orange Pi Zero board, but this can compile for other platforms without doing any modifications on the source code. NTP clock on Orange Pi Zero. To compile this application issue the following commands: make clean make Parameters related to this application are available at config.json file. This file can be used to specify the NTP server, time zone, and display module port. The source code of this project is available at github.com .

TFA9842AJ is quiet old 7.5W audio power amplifier introduced by NXP . This amplifier IC is no longer produced by NXP, but still, it's available to purchase in many places, which including eBay , AliExpress , Amazon , etc. NXP TFA9842AJ Power amplifier IC. I tested a couple of TFA9842AJ based amplifiers in the last couple of years. The main reason I liked TFA9842AJ is its simple, clean design, wide operating voltage, and high-quality bass-rich audio output. Thanks to it's built-in DC volume control circuit this audio amplifier can easily interface with MCU. In this article, we provide a generic TFA9842AJ module which works with most of Arduino boards, MCUs and SOCs. Schematic of the TFA9842AJ module. As illustrated above, this system consists of LM321 operational amplifier and TFA9842AJ IC. To support both 5V and 3.3V logic inputs we introduce logical level selection jumper ( J2 ) into this design. To control the volume PWM input must apply to the J1 . In this...