This project is about a single-channel microphone echo generator circuit. This circuit builds around the Holtek HT8970 echo effect generator IC. It offers complete control of the echo effect by providing delay, mix, and output level adjustments. HT8970 is an echo/surround sound effect generator IC with 20Kb SRAM. It also contains the built-in VCO stage, AD, and DA converters. The chip costs less than 0.5 US$ and is commonly available in the market. Prototype build of the echo effect generator circuit. The given schematic offers a maximum of 320ms time delay and works with a single-rail 9V DC power supply. In addition to the HT8970 integrated circuit, this circuit uses an NJM4558 op-amp to amplify the input and output audio signals. HT7150 voltage regulator uses in this design to power up the HT8970 IC. The HT7150 is a low-power 5V regulator IC from Holtek, the same maker of the HT8970 IC. Top view of the prototype build. The circuit designs to work with 500Ω dynamic mic...
This blog contains electronic, amateur radio, and embedded system projects, which I did during my free time. Unless otherwise noted, all the articles and projects described on this blog are based on my original designs.