Dilshan R Jayakody’s Web Log

These days good quality oscilloscope is not an expensive instrument and, we can see it in most workbenches. With the advancement of oscilloscopes, simple testing tools such as logic probes are not as popular these days. However, if the oscilloscope or logic analyzer was out of reach, the logic probe is a handy instrument to check digital circuits.  Also, in some cases, a logic probe is an easy option to check the functionality of low-speed logic circuits because it provides a real-time visual indication of the logic state without adjustments or calibrations. Prototype version of the logic probe. The logic probe design described in this post uses common and inexpensive ICs, including the popular NE555 timer and LM393 low voltage comparator IC. At the time of this writing, both ICs were prevalent in the market and cost less than LKR50 (US$ 0.25). This circuit design using SMD components to minimize the board size. The dimensions of the soldered PCB are around 70mm × 14mm × 6.6mm, ...

This is 8 channel CMOS logic probe and pulsar which is useful when designing, testing and faultfinding in digital circuits. This circuit is designed using commonly available CMOS logic ICs which including a couple of 4069 hex inverters and 4040 binary counter. A prototype version of 8 channel logic probe and pulsar The logic probe of this system is based on 4069 hex inverters and it indicates logic high and low states with 2 LEDs. Logic pulsar of this circuit is capable to generate 12 frequencies and highest frequency it can generate is 420kHz.  This pulsar generates a square wave with 50% duty cycle and it's average rise time is 16µS. Both schematic and PCB design of this logic probe and pulsar are available to download at google drive . In this schematic, all LED-L connections should connect to the anode of LEDs and cathode should be connected to the VSS terminal of J31 ( LED-L-H ) connector. All LED-H connections should connect to the cathode of LEDs and anode must...

Logic probe is an essential item for digital electronic fault findings and constructions. In this project we design compact and simple logic probe with digital pulse generator. This circuit is based on 4069 logic inverter and 7805 voltage regulator. In this design we use 4069 invert module to drive the LED of logic probe and to build the oscillator circuit. We use TO-92 style of 7805 regulator to drive the 4069 chip and entire circuit can be build around 2.5cm x 12cm PCB (if you need to reduce the size in to more, use the SMD version of 4069 and 7805) All the resistors are 1/8w and SMD versions are also acceptable. To change the period of pulser modify C1 or/and R2. Complete schematic of digital logic probe with pulser is available to download in here .