Dilshan R Jayakody’s Web Log

The Arduino Mini Amplifier is a compact audio system that merges vintage analog and modern digital components. It combines a Philips TDA8425 audio processor and an Arduino Nano , supporting Bluetooth and line-in audio, spectrum analysis, stereo modes, and software-controlled tone adjustment. Finished prototype of the Arduino Mini Amplifier. The Arduino Mini Amplifier is organized into six major subsystems: the audio processor, spectrum analyzer, Bluetooth source, power amplifier, control interface, and power management unit. This modular setup allows each part to operate with minimal interference from the others, making designing and PCB routing easier. The system uses separate paths for analog and digital ground signals (these are called GNDA for analog ground and GNDD for digital ground). Their connections are limited to specific points, which helps prevent unwanted electrical noise from the MCU from reaching the analog audio circuits. The audio section is centered on the T...

In this project, we developed a 5.1-channel analog audio processor using PT2322 IC. PT2322 is an inexpensive analog audio processor introduced by Princeton Technology Corporation . It contains 6-channel individual channel attenuators, a 3-way tone control system for front-end speakers, and a 3D audio simulation system.  Assembled 5.1-channel audio processing board. In this design, we combine PT2322 with Arduino Nano and interface it with PC/embedded computing boards through a USB port. Native GTK UI application provides to control all functions of the PT2322 IC. The Arduino Nano can directly plugin to the PT2322 module. There are three push buttons on the panel itself to control the volume and mute the audio. To reduce the cost and minimize the PCB size, we use both SMD and through-hole-type components in this PCB. The dimension of the PCB is 59mm × 60mm. The PCB of this module can directly order from the PCBWay project page . Using the PCBWay service, you can order high-...