Dilshan R Jayakody’s Web Log

CLI, also known as Caller ID and calling number delivery ( CND ), is a service offered by the telephone service provider to customers to obtain the calling party number and date/time of the call. The service activation and information format of CLI are different from telephone network operator to operator. CLI display unit - minimum test setup In this project, we will create a small Caller ID decoder using Arduino UNO and a custom-made HT9032D module. The core component of the project is the HT9032D, which can decode incoming call ID data over a telephone connection. This IC supports Bell 202 FSK and ITU-T version 2.3 CLI protocol specifications. The HT9032D module we created here base on the application example given in the IC datasheet . In addition to decoding CLI data, this module also can detect ring signal rises over the phone line. Assembled HT9032D module The Arduino UNO is used to process the decoded CLI data stream and manipulate the LCD. In an idle state, the decoder a...

This is simple telephone locator-light which is used to identify the ringing telephone at the night / low light conditions. This unit only activates at low light conditions and it automatically turns off lights after 12 - 15 sec. from the last ring. This telephone locator is mainly based on NE555 timer IC and it is designed to work with 6V 0.5A - 1A power source. This given schematic support a maximum of two 3W power LEDs. During the assembly, it is important to place both LEDs and LDR in two separate positions to avoid any interference to LDR from LEDs. Also, note that in some counties it is illegal to connect custom circuitry into phone lines, please check your local regulatory bodies is concerned. Schematic and PCB designs of this unit are available to download at google drive .