8-bit assembler compiler project

This project is an assembler compiler to generate a binary executable for 8-bit x86 like CPU systems. This compiler can parse NASM style assembler code and it compatibles with Marco Schweighauser's javascript 8-bit virtual CPU.

Compare with Marco Schweighauser's javascript compiler this compiler parse almost same assembler code and generate almost identical executable code. The only difference in this parser is that all the operands are separated by white space(s), and not with the comma ( , ).

 jmp start
hello:
 db "Hello World!"
 db 0

start:
 mov c hello
 mov d 232
 call print
 hlt

print:
 push a
 push b
 mov b 0
 
loop:
 mov a [c]
 mov [d] a
 inc c
 inc d
 cmp b [c]
 jnz loop

 pop b
 pop a
 ret

The output generated by this compiler for "Hello World" sample is listed in below and it can execute directly with Marco Schweighauser's 8-bit virtual CPU.

0000    1F0F 4865 6C6C 6F20 576F 726C 6421 0006  
0010    0202 0603 E838 1800 3200 3201 0601 0003  
0020    0002 0503 0012 0212 0315 0102 271F 3601  
0030    3600 3900

This compiler is implemented using Lazarus / FPC and it is designed to work with different operating systems including Linux and Microsoft Windows.

This 8-bit assembler compiler is an open source, free software project and it is released under the terms of GNU GPL version 3.0 license. All the source codes and Linux based binaries of this project are available to download at https://github.com/dilshan/assembler-compiler.

Comments

CD2003 - yet another simple FM radio receiver

In the last few days, we are looking for some simple FM radio receiver to integrate into one of our ongoing projects. For that, we try several FM radio receiver ICs including TDA7000, CD2003/TA2003/TA8164, CXA1019, and KA22429. Out of all those chips we select CD2003 (or TA2003/TA8164) based receiver for our project because of its simplicity and outstanding performance. Except to CD2003, Sony CXA1019 also perform well but we drop it because of its higher component count. We design our receiver based on Toshiba TA2003 datasheet and later we try TA8164 and CD2003 with the same circuit. Either CD2003 or TA8164 can directly replace TA2003 IC, and as per our observations, TA8164 gives excellent results out of those 3 chips. A prototype version of CD2003 FM radio receiver The PCB design and schematic which we used in our prototype project are available to download at google drive (including pin-outs of crystal filters and inductors ). Except for CD2003 IC, this receiver consist...

Arduino superheterodyne receiver

In this project, we extend the shortwave superheterodyne receiver we developed a few years ago . Like the previous design, this receiver operates on the traditional superheterodyne principle. In this upgrade, we enhanced the local oscillator with Si5351 clock generator module and Arduino control circuit. Compared to the old design, this new receiver uses an improved version of an intermediate frequency amplifier with 3 I.F transformers. In this new design, we divide this receiver into several blocks, which include, mixer with a detector, a local oscillator, and an I.F amplifier. The I.F amplifier builds into one PCB. The filter stage, mixer, and detector stages place in another PCB. Prototype version of 455kHz I.F amplifier. In this prototype build, the Si5351 clock generator drives using an Arduino Uno board. With the given sketch, the user can tune and switch the shortwave meter bands using a rotary encoder. The supplied sketch support clock generation from 5205kHz (tuner f...

Calculator for audio output transformers

Audio output transformers are heavily used in a vacuum tube and some (older) transistor base audio power amplifiers, but these days output transformer are quite hard to find and expensive item. For homebrew projects, the best option is to construct those transformers by ourselves and this script helps to calculate winding parameters for those transformers. This " AF output transformer calculator " script is written using Python and it works with most of the commonly available Python interpreters . The script is available to download at google drive under the terms of GNU General Public License version 3.0 . Homebrewed 25k: 4 output transformer Once supplied the input parameters this script provides a winding ratio, the number of turns required for primary and secondary winding and required copper wire gauges for both primary and secondary windings, etc. We construct several AF output transformers based on results of this script, which including transformers for M...